How to Use a Travel Shaving Brush Tube for a Mess-Free Shave
By TOBS | Luxury Grooming Products for Men | Taylor Old Bond Street | Published: 2026-10-25
Category: How-to Guides
Learn how to pack, store, and travel with a shaving brush tube to keep your brush protected and your bag dry. Simple steps for a mess-free grooming routine on the go.
Quick answer
Use a travel shaving brush tube to protect your brush bristles and keep moisture from leaking into your bag. The key is drying the brush first, then storing it bristle-up or bristle-down depending on the tube design.
Why a brush tube beats a plastic bag
A dedicated brush tube prevents bent bristles, crushed handles, and damp messes that plastic bags or pouches can't stop. The rigid walls hold the brush in place and allow airflow if the tube has ventilation holes. Without a tube, a wet brush can soak through your dopp kit and stain clothing or documents.
The trade-off is that you need to choose the correct size. A tube that's too small won't close, and one that's too large lets the brush rattle, which can damage the knot over time.
Choosing the right size for your brush
The Travel Shaving Brush Tube from Taylor Old Bond Street comes in two sizes: Small (interior height 8.5 cm, diameter 35 mm) and Large (interior height 12 cm, diameter 45 mm). Measure your brush from the base of the handle to the tip of the bristles, and check the diameter of the handle. If your brush is taller than 12 cm or wider than 45 mm, a tube won't fit—consider a travel brush instead.
How to use a travel shaving brush tube
- Shake and dry the brush after shaving: Rinse the brush thoroughly under warm water, then shake out excess water. Gently squeeze the bristles from the base to the tips with a clean towel. A damp brush inside a closed tube can develop mildew or a musty smell. Never store a soaking wet brush in the tube—always towel-dry first.
- Insert the brush bristle-first or handle-first: Most tubes work best with bristles pointing toward the closed end and the handle protruding slightly for easy removal. If your tube has a cap on both ends, you can store it bristle-up so air circulates around the damp hairs. Check whether your tube has ventilation holes; if not, bristle-up storage helps drying.
- Secure the cap and check for movement: Push the cap on firmly until it clicks or seats flush. Gently shake the tube—if you hear the brush knocking, add a small cloth or tissue at the handle end to pad it. A loose brush can damage the knot or chip the handle. Rattling means the tube is too large; pad it or switch to a smaller size.
- Pack the tube in your travel kit: Place the tube upright in a side pocket or lay it flat on top of heavier items. Avoid stacking hard objects on top of the tube, as pressure can deform the cap seal. The rigid shell protects the brush from being crushed by clothes or toiletries. Keep the tube accessible—you'll want to open it at your destination so the brush can finish drying.
- Air out the tube after your trip: Remove the brush and leave the tube open for a few hours to let any residual moisture evaporate. Wipe the interior with a dry cloth if you see condensation. This simple habit prevents odors and extends the tube's life. A dry tube is a clean tube—store it with the cap off between trips.
Product facts
- Travel Shaving Brush Tube: Available in Small (interior height 8.5 cm, exterior height 9 cm, diameter 35 mm) and Large (interior height 12 cm, exterior height 12.5 cm, diameter 45 mm). You can match the tube to your brush size to prevent rattling or cramming, keeping both the brush and tube in good condition.
Travel Shaving Brush Tube
