Start with the right refill and bowl
A traditional shaving soap refill is a simple puck of soap designed to sit in a bowl. The TOBS Traditional Shaving Soap Refill 55g in Ceramic Bowl pairs a 55g luxury shaving soap with a ceramic bowl that keeps the soap contained while you load your brush. The bowl is functional and sophisticated, and the refill is sized to fit it.
If you already own the ceramic bowl, you only need the 55g traditional luxury shaving soap refill. The product record states that the replacement soap required is the 55g traditional luxury shaving soap, so check that specification when buying refills.
What the refill set includes
- Traditional Shaving Soap Refill 55g in Ceramic Bowl: Includes a 55g traditional luxury shaving soap and a ceramic bowl. The bowl holds the soap securely while you load the brush, and the 55g puck is the correct refill size for this bowl.

Traditional Shaving Soap Refill 55g in Ceramic Bowl - Traditional Shaving Soap Refill 55g in Ceramic Bowl: Replacement shaving soap required is the 55g traditional luxury shaving soap. When the soap runs out, you can buy just the refill rather than a new bowl.
How to load your brush from the soap in the bowl
These steps assume you are using the ceramic bowl with the soap seated inside. Adjust the amount of water and pressure to suit your brush and water hardness.
- Soak your brush: Fully wet your shaving brush with warm water. A damp brush helps soften the surface of the hard soap and pick up enough soap for a good lather.
- Shake off excess water: Give the brush a gentle shake so it is damp rather than dripping. Too much standing water can make the soap slide around and dilute the load.
- Swirl the brush over the soap: Move the brush in circular motions across the surface of the soap in the bowl. Keep the brush in contact with the soap and use light to moderate pressure. The soap will begin to load into the bristles.
- Check the load: After a series of swirls, look at the bristles. A well-loaded brush shows a visible layer of soap paste. If the brush still looks mostly dry, continue swirling and add a little water to the brush if needed.
- Build the lather: You can build lather directly on your face or in a separate bowl. Add water a few drops at a time and work the brush until the lather reaches the consistency you prefer. If the lather looks dry or flaky, add more water; if it looks thin and runny, work it longer.
Tips for lathering hard shaving soap
Hard shaving soaps like this traditional refill reward a little patience. These adjustments help you get a consistent lather.
- Use warm, not hot, water: Very hot water can break down the lather and may not be comfortable on your skin. Warm water is sufficient for softening the soap surface and building lather.
- Load more soap than you think you need: Hard soaps release less soap per swirl than soft creams. Start with a generous load and add water gradually; it is easier to thin a thick lather than to fix a thin one.
- Keep the bowl steady: The ceramic bowl adds weight and stability while you swirl the brush. Hold the bowl firmly or set it on a non-slip surface to prevent tipping.
- Let the soap dry between uses: After shaving, leave the soap in the bowl to air-dry before covering or storing. Excess water left in the bowl can make the soap soft and shorten its life.
Refilling the ceramic bowl
When the soap is used up, remove any remaining scraps and rinse the bowl. The replacement is the 55g traditional luxury shaving soap refill. Press the new soap into the bowl so it sits flat and secure. The supplied information does not specify a particular fitting method, so use gentle pressure and avoid forcing a soap that does not seat easily; check that you have the correct 55g refill.
What the supplied information does not cover
The product record does not include specific instructions for soaking time, loading duration, or water temperature beyond general guidance. It also does not confirm whether the soap is triple-milled or list ingredients. If you have sensitive skin or specific ingredient concerns, review the product packaging or consult the manufacturer before use. The steps above are general best practices for hard shaving soap, not manufacturer instructions.

